100ml Black Irregular Glass Perfume Bottle with a Facet Cap

This 100ml bottle stands 126 mm from the base to the highest point of the cap and measures 50 mm across the body.

The silhouette is deliberately off-pattern. The shoulder is cut back at an angle on both sides instead of curving into the neck, the body corners below are chamfered the same way, and the front is left as one flat panel between them. That combination gives a body that reads as an irregular faceted block: straight where it meets the table, angled where it meets the light, and changing shape as the bottle turns. The finish is a matte black that absorbs the highlight instead of reflecting it, so the chamfers stay visible as tonal steps rather than bright edges.

The closure is a faceted polyhedron rather than a cylinder or a dome, moulded as a separate part and listed on the structure drawing as the plastic cap. The bottle is presented here with a matte black rigid box finished with a gold chevron band and a matching black paper bag, and glass containers start at MOQ 5000 pcs.

Technical Specifications

Parameter	Specifications
Product Name	100ml Black Irregular Glass Perfume Bottle with a Facet Cap
Capacity	100ml
Material	Glass with Metal Sprayer and a Changeable Faceted Plastic Cap
Reference Size	126 mm Overall Height (Cap Included) × 50 mm Body Width
Bottle Shape	Irregular Flattened Flacon with Chamfered Shoulder and Base Corners, a Flat Front Panel and a Short Neck, in Matte Black Glass
Cap	Faceted Polyhedron Cap (Listed as a Plastic Cap on the Drawing), Shown in Matte Black and with Gold-Faced Facets, Changeable
MOQ (Minimum Order Qty)	5000 pcs (Available for Custom Sample)
Surface Finish	Matte Black Coating, Soft-Touch Lacquer, Frosting, Silk Screen, Hot Stamping, Electroplating
Neck Finish	Standard Perfume Crimp Neck for Sprayer / Atomizer

Product Features

Irregular Faceted Body
Shoulder cut back at an angle on both sides instead of curving
Base corners chamfered to the same angle as the shoulder
One flat front panel between the chamfers for the decoration
Flattened flask, so the profile changes as the bottle turns
Matte Black Finish
Matte black surface that absorbs the highlight rather than bouncing it
Chamfers read as tonal steps, not as bright edges
Even coverage across the flat panel and the cut faces
Black carried through the neck and shoulder so the body reads as one block
Faceted Polyhedron Cap
Moulded as a separate part, listed as a plastic cap on the structure drawing
Wide enough to read as an object of its own above the neck
Shown in matte black and with gold-faced facets
Changeable, so one body carries a different cap per fragrance
Lettering Applied to the Glass
Brand mark set in gold directly on the flat front panel
Second line held smaller so the mark stays legible at shelf distance
Capacity printed low on the panel, out of the way of the brand mark
Rigid Box and Paper Bag
Matte black rigid box with a gold chevron band across the lower edge
Black paper bag with a twisted cord handle and the same gold mark
Box lid lifts clear, so the bottle stands unboxed in the same colours
Drawing notes the bottle as applied to the packaging of perfume

Customization Options

Two decisions carry this design: how far the chamfers are cut back, and how matte the black is allowed to go. The chamfer angle sets the silhouette, and the gloss level decides whether the facets read as tonal steps or as hard highlights.

Cap options
Matte black facets, as shown on the main bottle
Gold-faced or two-tone facets, as shown beside it
Cap can be changed for a different profile or finish on the same body
Cap colour matched to the box band or left in contrast to it
Cap face engraved or left plain
Decoration
Gold lettering printed directly on the glass, as shown
Silk screen printing in one or more colours
Hot stamping in gold or silver foil
A metal plate set into the flat front panel
Logo reversed out of the black finish
Packaging
Matte black rigid box with a gold chevron band, as shown
Band colour or finish changed to suit the range
Paper bag with a twisted cord handle and the same mark
Box interior lined in foam or a moulded insert
Bottles supplied on their own, boxed, or boxed and bagged

FAQ

Q1: What are the dimensions and the capacity of this black perfume bottle?

The size drawing gives two figures: 126 mm overall height and 50 mm across the body, with the capacity stated on the same drawing as 100ml. The height runs from the base to the highest point of the cap, so it already includes the closure, and the cap is a faceted polyhedron that sits proud of the shoulder, which is why the overall height is taller than the glass alone. The 50 mm figure is the width you see face on, and it is the number to work from when sizing an insert or an outer carton.

Q2: What makes the shape irregular, and how is it made?

The shoulder is cut back at an angle on both sides instead of curving into the neck, and the base corners are chamfered to the same angle, so the body reads as a faceted block rather than a rectangle with rounded edges. The front is left as a single flat panel between those cuts, which is where the decoration goes. Because the body is a flattened flask, the profile changes as the bottle turns, and the chamfers take the light as tonal steps instead of bright edges.

Q3: Is the cap plastic or metal, and can it be changed?

The structure drawing lists the cap as a plastic cap, and it is a moulded polyhedron with flat facet faces rather than a turned or cast part. The customisation drawing states that the cap can be changed, and this batch shows the same bottle with a matte black cap and with a cap finished in gold on the facets, so a single body can carry more than one cap finish or profile within one project while the mould stays the same.

Q4: What is the finish on the glass, and does it mark easily?

The body is finished in matte black, which absorbs the highlight rather than reflecting it and keeps the chamfers readable as tonal steps. Matte finishes show fingerprints more than gloss does, so a soft-touch lacquer or a sealed matte coat is the usual choice for a retail bottle. Gloss black, solid colour, frosting, tinted glass and mirror electroplating are all available on the same mould if the finish needs to change for a different range.

Q5: What comes with the bottle, and what is the MOQ?

MOQ is 5000 pcs for glass containers, with custom samples available before mass production. The bottle is shown with a matte black rigid box carrying a gold chevron band across the lower edge and a matching black paper bag with a twisted cord handle, and both can carry the same gold mark as the glass. The structure drawing sets out the sprayer, the glass body and the cap as separate parts on a standard crimp neck, so the pump can be supplied fitted or packed separately for filling on your own line.