This 60ml flacon stands 104 mm from the base to the top of the fitted cap, with a base 70 mm wide and 33 mm front to back. All three figures come from the size drawing, which states the capacity as 60ml, and the height is taken with the closure in place, so it already includes the cap.
The body is a wide, thin flacon with softly rounded corners rather than cut ones, so the silhouette reads as a soft block instead of a sharp box. The front face is framed and the shoulder steps in above it, and the base is left thick and clear, which is where the sample goes almost colourless while the upper body holds the deep red. Rounding the corners takes the edge off the block without losing the flat face a label needs.
The closure is a double-layer leather cap, grained across the surface and finished with silver rings top and bottom, and the same body is also shown with a plain gold cylindrical cap. The structure drawing separates the assembly into sprayer, glass body and double-layer leather cap and notes the bottle as applied to the packaging of perfume, while the customisation drawing states that the cap can be changed, so one body can carry a leather closure in one fragrance and a plated one in the next. Glass containers start at MOQ 5000 pcs with custom samples available.
| Parameter | Specifications |
|---|---|
|
Product Name |
60ml Rounded Corner Glass Perfume Bottle with Leather Cap |
|
Capacity |
60ml |
|
Material |
Glass with Metal Sprayer and Double-Layer Leather Cap |
|
Reference Size |
104 mm Overall Height (Cap Included) × 70 mm Width × 33 mm Depth |
|
Bottle Shape |
Wide Flat Flacon with Rounded Corners, a Stepped Shoulder, a Framed Front Panel and a Thick Clear Base |
|
Cap |
Double-Layer Leather Cap with Silver Rings, Supplied With a Plain Gold Cap as an Alternative, Changeable |
|
MOQ (Minimum Order Qty) |
5000 pcs (Available for Custom Sample) |
|
Surface Finish |
Colour Coating, Electroplating, Gradient Spraying, Frosting, Silk Screen, Hot Stamping |
|
Neck Finish |
Standard Perfume Crimp Neck for Sprayer / Atomizer |
Rounded Corner Flacon Body
Wide flacon, 70 mm across the front, 33 mm deep and 104 mm tall with the cap fitted
Softly rounded corners rather than cut ones, so the silhouette reads as a soft block
Framed front face with the shoulder stepping in above it
Thick clear base, with a deep red body that lightens towards the foot
Double-Layer Leather Cap
Two-layer cap with a grained leather surface, finished with silver rings top and bottom
Shown in this set in dark brown leather and, on the same body, as a plain gold cap
Changeable, so one body carries a leather closure or a plated one
Metal Sprayer on a Crimp Neck
Standard perfume crimp neck that takes ordinary pumps and atomizers
Seated fit that resists leakage in transit
Supplied fitted to the bottle or ordered separately
Deep Red Body
Tinted glass that reads deep red at the shoulder and clears towards the base
Colour coating, gradient spraying and frosting all available
Framed front panel, so the brand mark sits inside its own field
The cap can be changed for a different colour, profile or material
Double-layer leather cap supplied in brown, black or a colour matched to the glass
Plain gold plated or silver plated cap as an alternative to the leather closure
Cap rings supplied in silver or gold
Opaque colour coating in any solid shade
Tinted glass in deep reds, ambers or pale pastels
Gradient spraying from a solid shoulder down to a clear base
Mirror electroplating for a fully reflective surface
Frosted and matte treatments for a soft touch look
Silk screen printing in one or more colours
Hot stamping in gold or silver foil
Brand mark applied inside the framed front panel
The size drawing gives three figures: 104 mm overall height, 70 mm across the front and 33 mm front to back, and the same drawing states the capacity as 60ml. The height is measured from the base to the top of the fitted cap, so it already includes the closure, which makes 104 mm the figure to work from when sizing an insert or an outer carton. The 33 mm depth is worth checking against an existing tray, because a thin flacon shows its full face from the front and almost nothing from the side.
The body is a wide, thin flacon with softly rounded corners rather than cut ones, so the silhouette reads as a soft block instead of a sharp box, and the shoulder steps in above the framed front face. Both the corner radius and the shoulder step are formed in the mould, so they survive whether the body is left clear, tinted or coated. Rounding the corners rather than bevelling them keeps the full width of the flat front panel available for a label while the glass stays comfortable to hold.
The closure is a double-layer leather cap with a grained surface, finished with silver rings top and bottom. This set shows the same body with that leather cap and with a plain gold cylindrical cap, so the closure is supplied in either form. The structure drawing lists the sprayer, the glass body and the double-layer leather cap as three separate parts and notes the bottle as applied to the packaging of perfume, and the customisation drawing states that the cap can be changed, so a closure can be swapped between fragrances without touching the body mould.
The body can be left translucent and tinted, colour coated in any opaque shade, gradient sprayed, mirror electroplated, or frosted and matte finished. The sample shown is a deep red that holds at the shoulder and clears towards the thick base, so the colour stays readable while the foot keeps the light. The brand mark is applied inside the framed front panel by silk screen printing or hot stamping, sitting clear of the rounded edge.
MOQ is 5000 pcs for glass containers, with custom samples available before mass production. The drawing lists the bottle, the sprayer and the closure as separate parts, so the sprayer and the cap can be supplied fitted or ordered on their own, and because the cap is a changeable component it can be ordered in leather and in a plated finish within a single project.
804, 8th Floor, Joy Plaza, 388 Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
©Copyright Lansenpack All Rights Reserved.
