This 80ml flacon stands 96 mm from the base to the top of the fitted spherical cap, and measures 84 mm across the front against a depth of 52 mm, so the body is noticeably wider than it is tall. All three figures are transcribed from the size drawing, which states the capacity as 80ml.
The silhouette is a low wide block with the corners chamfered away, and the front panel is cut as a diamond. A fan of triangular facets radiates from a point low on the panel, so the surface breaks into planes that meet at hard edges instead of curving, and the colour of the juice reads differently in each facet. The bottom edge dips into a shallow V at the centre, which lifts the body visually off the shelf and lets light run under the glass.
The closure is a gold plated sphere seated on a short neck. The structure drawing separates the assembly into sprayer, glass body and plastic cap, and lists the bottle as applied to the packaging of perfume; the customisation drawing states that the cap can be changed, so the sphere can be swapped for a different profile or finish without altering the body mould. The bottle ships in the red rigid box shown here, which carries a gold wordmark and an embossed lid over a white insert tray. Glass containers start at MOQ 5000 pcs with custom samples available.
| Parameter | Specifications |
|---|---|
|
Product Name |
80ml Diamond Cut Glass Perfume Bottle |
|
Capacity |
80ml |
|
Material |
Glass with Metal Sprayer and Gold Plated Plastic Cap |
|
Reference Size |
96 mm Overall Height (Cap Included) × 84 mm Width × 52 mm Depth |
|
Bottle Shape |
Low Wide Faceted Body with Chamfered Corners, a Diamond Cut Fan Faceted Front Panel and a V Notched Base |
|
Cap |
Gold Plated Sphere Plastic Cap, Changeable |
|
MOQ (Minimum Order Qty) |
5000 pcs (Available for Custom Sample) |
|
Surface Finish |
Colour Coating, Electroplating, Gradient Spraying, Frosting, Silk Screen, Hot Stamping |
|
Neck Finish |
Standard Perfume Crimp Neck for Sprayer / Atomizer |
Diamond Cut Faceted Body
Front panel cut into a fan of triangular facets radiating from a low central point
Facet edges meet hard, so the surface reads as cut stone rather than moulded glass
Each facet picks up a different depth of colour from the juice behind it
Chamfered corners carry the cut around the sides of the body
Low Wide Silhouette
84 mm across the front against a 52 mm depth, so the flacon sits low and wide
96 mm overall height with the cap fitted, base to cap top
Bottom edge notched into a shallow V at the centre
The notch lifts the body off the shelf and lets light pass under the glass
Gold Plated Sphere Cap
Full sphere closure, polished to a mirror finish
Seated on a short neck, so the sphere reads as its own object above the body
Changeable, so one body carries a different cap profile or finish per fragrance
Metal Sprayer on a Crimp Neck
Standard perfume crimp neck that takes ordinary pumps and atomizers
Seated fit that resists leakage in transit
Supplied fitted to the bottle or ordered separately
Perfume Packaging
Drawing notes the bottle as applied to the packaging of perfume
Glass left clear, tinted or coated so the juice colour works either way
Available with the red rigid box, embossed lid and white insert tray shown here
The cap can be changed for a different colour or profile
Sphere cap supplied gold plated, silver plated or colour matched to the glass
Opaque colour coating in any solid shade
Tinted glass in warm ambers, deep reds or pale pastels
Mirror electroplating for a fully reflective surface
Gradient spraying that holds at the shoulder and clears towards the base
Frosted and matte treatments for a soft touch look
Silk screen printing in one or more colours
Hot stamping in gold or silver foil
Brand logo applied to the front panel, printed or as a loose script mark on the facet
Rigid box with an embossed lid, a gold wordmark and a white insert tray
The size drawing gives three figures: 96 mm overall height, 84 mm across the front and 52 mm from front to back. The height is measured from the base to the top of the fitted ball cap, so it already includes the closure. Capacity is stated on the same drawing as 80ml. Because the body is wider than it is tall, the 84 mm by 52 mm footprint is the pair to work from when sizing an insert or an outer carton, and the sphere cap adds the rest of the height above it.
The front panel is split into a fan of triangular facets that radiate from a point low on the panel, with each facet left as a separate flat plane. That is what gives the bottle its cut stone look, because the planes meet at hard edges rather than blending into a curve. The same cut is carried around the chamfered corners, so the effect continues onto the sides. It shows up strongest on tinted or gradient sprayed glass, where each facet catches a slightly different depth of colour from the liquid behind it.
The closure is a gold plated sphere, listed on the structure drawing as the plastic cap and shown there as a separate part standing beside the bottle. The drawing separates the assembly into sprayer, glass body and plastic cap, and the customisation drawing states that the cap can be changed. The sphere can therefore be supplied in a different plating or swapped for another cap profile while the body mould stays exactly the same.
The body can be left clear and tinted, colour coated in any opaque shade, mirror electroplated, gradient sprayed, or frosted and matte finished. The sample shown is a deep warm red that clears towards the base, which suits the diamond cut because the facets read as tonal shifts rather than flat colour. The brand mark on the front panel is applied by silk screen printing or hot stamping, printed either straight or as a loose script mark laid across the facets.
MOQ is 5000 pcs for glass containers, with custom samples available before mass production. The drawing notes the bottle as applied to the packaging of perfume, and it can ship on its own or as a set with the red rigid box, embossed lid and white insert tray shown here. The sprayer and the sphere cap are supplied fitted or ordered separately, and since the cap is a changeable component it can be ordered in more than one plating within a single project.
804, 8th Floor, Joy Plaza, 388 Guangyun Road, Baiyun District, Guangzhou City, Guangdong Province
©Copyright Lansenpack All Rights Reserved.
